MIL-DTL-44258B
3.6 Cable assembly tests. The electrical cable assemblies shall have a direct current resistance of
less than 1 ohm when tested for electrical continuity as specified in 4.4.1. In addition, the
insulation resistance shall be greater than 100 megohms when tested as specified in 4.4.2.
3.7 Distribution box tests. The electrical distribution boxes shall have a direct current resistance
of less than 1 ohm when tested for electrical continuity as specified in 4.4.3.
3.8 Convenience outlet tests. The convenience outlets shall have a direct current resistance of less
than 1 ohm when tested for electrical continuity as specified in 4.4.1. In addition, the insulation
resistance of all cables shall be greater than 100 megohms when tested as specified in 4.4.2.
4 VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 First article inspection. When a first article is required (see 6.2), it shall be examined for the
defects specified in 4.3.2 and 4.3.3 and tested in accordance with section 4.3.4. Any
nonconformance or test failure shall be cause for rejection.
4.3 Conformance inspection. Unless otherwise specified (see 6.2), conformance inspection shall
consist of sections 4.3.1 through 4.3.2. Sampling for inspection shall be performed in accordance
with ANSI Z1.4.
4.3.1 Component and material inspection. In accordance with 3.2, components and materials
shall be inspected for compliance with all the requirements of referenced documents unless
otherwise excluded, amended modified, or qualified in this specification or applicable purchase
document.
4.3.2 End item visual examination. The end items shall be examined for the defects listed below.
The lot size shall be expressed in units of electrical distribution assemblies of one type only.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business